Mech Laboratories
LABORATORIES & LICENSED SOFTWARES IN THE DEPARTMENT OF MECHANICAL ENGINEERING
- Workshop Laboratory.
- Computer Aided Engineering Drawing.
- Material Testing Laboratory.
- Mechanical Measurements & Metrology Laboratory.
- Foundry & Forging Laboratory.
- Machine Shop Laboratory.
- Fluid Mechanics & Machines Laboratory.
- Energy Laboratory.
- Heat Transfer Laboratory.
- Computer Aided Modelling & Analysis Laboratory.
- CIM & Automation Laboratory.
- Design Laboratory.
- M.Tech Laboratory (MPM).
- M.Tech Laboratory (TPE).
- Licensed Softwares.
Sl. No. | Name of the Equipment / Tools |
1 |
Bench Drilling Machine |
2 |
Welding Machine |
3 | Power Hacksaw |
4 | Welding Transformer |
5 |
Sheet metal Tools |
6 | Fitting Tools |
7 | Welding Tools |
Sl. No. | Name of the Equipment / Tools |
1 |
Magnetic Crack Detector Sample Plate |
2 | Metallurgical microscope |
3 | Buffing Machine |
4 | Imported Microhardness Tester Model: HVS 1000B with load-range from 10gm up to 1000gm with camera and image analysis software |
5 | Real-Time Based Live Image Analysis Software system for metallurgical Microscope including watec japan Camera 5megapixels, grabber card, adaptor and complete software for metallurgical microscope |
6 | Impact Testing Machine DigitalFIE Make, Model: IT 30D |
7 | ROCKWELL Cum Brinell HARDNESS TESTERFIE Make, Model: RASN (B) |
8 | MUFFLE Furnace (12000C) with Digital PID Controller |
9 | Double Disc Polishing Machine DC Motor with variable Speed up to 1200 RPM |
10 | Analogue Torsion Testing Machine |
11 | Digital Fatigue Testing Machine |
12 | Portable Digital Ultrasonic Flaw Detector Model 44440 |
MECHANICAL MEASUREMENTS & METROLOGY LABORATORY
Sl. No. | Name of the Equipment / Tools |
1 | Drill Tool Dynamometer |
2 | Mill Tool Dynamometer (3” vice) |
3 | Lathe Tool Dynamometer |
4 | Temperature indicator tooltip temperature |
5 | Autocollimator |
6 | Profile projector |
7 | Tool maker’s microscope |
8 | Load cell, Digital load indicator |
9 | LVDT Trainer |
10 | Strain measurement trainer, Strain indicator, Strain gauge kit |
11 | Comparators: Pneumatic, Mechanical |
12 | Measurement of surface roughness |
FOUNDRY & FORGING LABORATORY (F&F)
Sl. No. | Name of the Equipment / Tools |
1 | Muffle Furnace |
2 | Sand Washer |
3 | Sieve Shaker |
4 | Sand Rammer |
5 | Permeability teller |
6 | USS Tester |
7 | Digital Balance |
8 | Rapid Moisture Tester |
9 | Shatter Index |
10 | Muller |
11 | Mould Hardness Tester |
12 | Core Hardness Tester |
13 | Dewalt 14”Cut off machine |
Sl. No. | Name of the Equipment / Tools |
1 | Azad Power Hacksaw machine |
2 | Kirloskar Lathe EP - 1330 |
3 | Kirloskar Shimoga Lathes |
4 | Batliboi Milling machine |
5 | Rolex Planing machine |
6 | Rolex Surface Grinding machine |
7 | Effico Radial Drilling machine |
8 | Eiffco Pillar Drilling machine |
9 | Sager Grade - I Shaping machine 18" |
10 | Serovo-raj Shaping machine 12" |
11 | Eiffco Slotting machine |
12 | Kirloskar Lathe 1550 |
13 | Batliboi BGL 350 Lathe |
14 | Kirloskar - MK Capstan Lathe |
15 | Rolex Prima Hacksaw machine |
16 | Bench Grinding machine 8" |
FLUID MECHANICS & MACHINES LABORATORY
Sl. No. | Name of the Equipment / Tools |
1 | Venturi and Orifice meter setup |
2 | Friction in Pipes and Minor losses in Pipe fittings setup |
3 | Notch Calibration |
4 | Impact of Jet on Vanes |
5 | Centrifugal Pump test rig |
6 | Metacentric Height Ship model |
7 | Bernoulli’s Apparatus (With Renould’s Apparatus attachment) |
8 | Gear and Vane Pump test rig |
9 | Reciprocating Pump test rig |
10 | Series and Parallel pump test rig |
11 | Pelton Wheel Turbine |
12 | Francis Turbine |
13 | Kaplan Turbine |
14 | Open Orifice and Mouth Piece setup |
15 | Calibration of Flow nozzle |
16 | Performance test on Centrifugal Air Blower |
Sl. No. | Name of the Equipment / Tools |
1 | Planimeter |
2 | Redwood Viscometer |
3 | Flashpoint Cleve land |
4 | Gas Test assembly |
5 | Cloud and Pourpoint apparatus |
6 | Pressure Gauge |
7 | Carbon residue Test |
8 | Drop point of Grease |
9 | Pento meter |
10 | Flashpoint apparatus |
11 | Say Bolt Viscometer |
12 | Bomb Calorimeter |
13 | Gas Calorimeter |
14 | Torsion Viscometer |
15 | Ring and Ball apparatus |
16 | Single Cylinder (2-Stroke) Petrol Engine |
17 | Single Cylinder (4-Stroke) Diesel Engine |
18 | Torque Wrench |
19 | Japan Socket Toolbox set |
20 | Air Compressor |
21 | Orsat Gas Analysis apparatus |
22 | Twin Cylinder Diesel engine Test rig (4-Stroke) |
23 | 3HP Diesel engine (2-Stroke) |
24 | Horizontal Diesel engine 6HP (4-Stroke) |
25 | Single Cylinder Petrol engine (4-Stroke) |
26 | Multi Cylinder Petrol engine (4-Stroke) |
27 | Variable compression ratio petrol engine test rig |
28 | Nozzle tester |
29 | Single cylinder Diesel engine with Electrical loading (4-Stroke) |
30 | Single cylinder Petrol engine with Electrical loading (2-Stroke) |
31 | AVL 437 Smoke meter |
32 | CO/HC Gas analyzer |
33 | Computerized Single cylinder Diesel engine (4-Stroke) |
34 | Gas Cylinder (Oxygen) |
35 | Exhaust gas Calorimeter |
36 | Cut section model of Petrol engine (4-Stroke) |
37 | Digital panel meters for engine test rigs |
38 | 0.5 HP Slow Speed Motor |
39 | Weighing Balance (Electrical) |
40 | Junkers Gas Calorimeter |
41 | Multi Cylinder Petrol Engine test rig with hydraulic dynamometer for Morse test |
42 | Variable Compression Ratio Petro engine test rig |
43 | Torsion Viscometer |
44 | Single Cylinder Four stroke petrol engine test rig |
HEAT & MASS TRANSFER LABORATORY
Sl. No. | Name of the Equipment / Tools |
1 | Thermal Conductivity of a Metal Rod set up. |
2 | Heat Transfer Coefficient of a Composite wall set up |
3 | Effectiveness on a Metallic fin set up |
4 | Free Convection on a vertical tube set up |
5 | Forced Convection Flow through a Pipe set up |
6 | Emissivity of a Surface set up |
7 | Stefan Boltzmann Constant set up |
8 | Parallel Flow and Counter Flow Heat Exchangers set up |
9 | Boiling of Liquid and Condensation of Vapour apparatus |
10 | Vapour Compression Refrigeration test rig |
11 | Vapour Compression Air - Conditioner test rig |
12 | Transient Conduction Heat Transfer set up |
13 | Pebble Bed Heater |
14 | Fluidized Bed Chamber |
15 | Electrical Analogy |
Sl. No. | Name of the Equipment / Tools |
1 | Static and Dynamic Balancing apparatus |
2 | Universal Governor Apparatus |
3 | Motorized Gyroscope |
4 | Whirling of Shafts |
5 | Journal Bearing apparatus |
6 | Polariscope (Diffused Light Research) |
7 | Vibration setup |
8 | Strain Gauge |
Sl. No. | Name | Configuration |
1 | Personal Computers (DELL) | Dual Core, 1GB RAM, 500 GB HDD, 17" Monitor. |
2 | Personal Computers (HCL) | Core 2 Duo, 2GB RAM, 500 GB HDD, 18.5" Monitor. |
3 | Personal Computers (DELL) | Core I3, 4GB RAM, 500 GB HDD, 18.5" Monitor. |
4 | Workstation Computers (DELL) | Core I5, 4GB RAM, 500 GB HDD, 18.5" Monitor. |
Sl. No. | Name | Configuration |
1 | Personal Computers (DELL) | Dual Core, 1GB RAM, 500 GB HDD, 17" Monitor. |
2 | Personal Computers (HCL) | Core 2 Duo, 2GB RAM, 500 GB HDD, 18.5" Monitor. |
3 | Personal Computers (DELL) | Core I3, 4GB RAM, 500 GB HDD, 18.5" Monitor. |
M.TECH LABORATORY (PRODUCTION MANAGEMENT)
Sl. No. | Name | Configuration |
1 | Workstation Computers (DELL) | Core I5, 4GB RAM, 500 GB HDD, 18.5" Monitor. |
2 | Workstation Computers (DELL - Server) | Core I7, 16GB RAM, 1TB HDD, 21" Monitor. |
M.TECH LABORATORY (THERMAL POWER ENGINEERING)
Sl. No. | Name | Configuration |
1 | Personal Computers (LENOVO) | Core I5, 8GB RAM, 1TB HDD, 18.5" Monitor. |
Sl. No. | Name of the Software |
1 | MTAB Lathe & Mill |
2 | NISA V12 |
3 | ANSYS V10.0 |
4 | Solid Edge V19 |
5 | AMESim Hydraulics and Pneumatics Software |
6 | ANSYS V12.0 |
7 |
|
8 |
|
9 | Robocell V5.6 |
10 | Autocad 2017 |