Myself Prof. Virupaksha Gouda H, Working as an Assistant Professor in the Department of Mechanical Engineering. R.Y.M.E.C Ballari, Karnataka. Since form February 2015. Completed my Diploma in Mechanical Engineering in the Year 2007 from D.T.E-Bangalore. Further, I completed my Bachelor’s degree in Industrial & Production Engineering in the Year 2011 from VTU, Belagavi and Master’s of Technology in Production Management in the Year 2014 from VTU, Belagavi and Grabbed University Second Rank from VTU. Meanwhile, in this Journey, I worked for Jindal Steel Limited for about 08 Years. Awarded with Ph.D Degree from VTU University in the area of Bio-Composite Materials Under the Guidance of Dr. S Channabasavaraj and Dr. A Thimmana Gouda in the Year 2022.
Industrial Working Experience:
1. Presented a paper in the 3rd International Conference on “Computing, Engineering & Information Technology” (ICCEIT 2014) on August 25th,2014 at The Solitaire Hotel, Bangalore, India.
2. Participated in the KSTA National conference on “Impact of Science and Technology on Society and Economy” organized by KSTA, DST, GoK and VSKU, Ballari on 8th & 9th March 2017.
3. Presented a paper in the International Conference on “Recent Innovation in Science, Engineering & Management” (RISEM 2019) on 10th & 11th of May 2019 at RR Institute of Technology, Bangalore, India.
4. Presented a paper in 4th International Conference on "Advanced Research in Mechanical, Materials and Manufacturing Engineering" (ICAMMME-2020)” on 10th and 11th July 2020 Organized by School of Mechanical Engg, REVA University, Bangalore India.
5. Presented Two papers in the 2nd International Conference on “Recent Developments in Material Science and Applications" (ICRDMSA 2020) on 25th and 26th September 2020, Organized by Department Mechanical Engg, Chennai Institute of Technology, Chennai, India.
FDP's:
1. Successfully completed Four Days of FDP attended on “Process Quality through Optimization Techniques & Waste Utilization in Steel Manufacturing” from 20th to 23rd May 2015 Organised by VTU-VGST Sponsored at BITM, Ballari.
2. Successfully completed Two Days of FDP attended on “System Dynamics” at RYMEC, Ballari from 18th to 19th Feb 2016 Organised by RYMEC, Ballari.
3. Successfully completed Three Days of FDP attended “Industrial Automation & Computer-Aided Engineering” from 23rd to 25th July 2016 Organised by RYMEC, Ballari.
4. Successfully completed Four days of FDP attended on “Outcome Based Education” from 16th to 19th Jan 2017 Organised by RYMEC, Ballari.
5. Successfully completed Six days of FDP attended on “Product Life Cycle Management & Thermo Acoustic Refrigeration” from 11th to 16th Aug 2017 Organised by RYMEC, Ballari.
6. Successfully completed AICTE Approved Two Weeks FDP on “Foundation Program in ICT for Education (FDP101x)” Organized by IIT, Bombay, Under PMMMNMTT, MHRD and GOI from 08th March 2018 to 12th April 2018.
7. Successfully completed AICTE Approved 2Weeks FDP on “Pedagogy for Online & Blended Teaching-Learning Process (FDP201x)” Organized by IIT, Bombay, Under PMMMNMTT, MHRD & GOI from 3rd May to 18th June 2018.
8. Honor Code Certificate Issued for “SKANI101x: Basic 3D Animation using Blender”, a Certification course offered by IIT, Bombay. Online certification course conducted from 04th Apr 2018 to 11th July 2018.
9. Honor Code Certificate Issued for “SKVIZ101x: Fundamentals of 3D Visualization”, a Certification course offered by IIT, Bombay. Online certification course conducted from 29th August 2018 to 07th October 2018.
10. Successfully completed a One-day online FDP attended on “Contemporary tools & techniques for teachers and researchers in Higher Education Experience of using Virtual Classrooms” on 9th May 2020 Organized by Cambridge institute of technology, Bangalore.
11. Successfully completed One Week Lecture Series on "Purely the fundamentals of Mechanical Engineering" from 01st to 05th June 2020 Organized by Chennai institute of technology, Chennai.
12. Successfully completed Five Days FDP on "Mechanical Behaviour of Advanced Materials and Its Scope for Engineering Applications" from 10th to 14th June 2020 Organized by Sri Venkateswara College of Engineering, Sriperumbudu.
13. Successfully completed One Week Lecture Series on "Mechanical Behaviour of Materials" from 01st to 06th July 2020 Organized by Chennai institute of technology, Chennai.
14. Successfully completed One Week FDP on "Optimization Techniques for Mechanical Engineers" from 27th July to 01st August 2020 Organized by Vignan institute of technology & science, Telangana.
15. Successfully completed One Week ISTE, Telangana Sponsered FDO on "Out Come Based Education and Accreditation" from 05th to 09th October 2020 Organized by ISTE, Telangana Section in Association with JNTU, Hyderabad.
16. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “The role of Additive Manufacturing in the Era of Industry 4.0” from 21st to 25th June 2021 organised by Chennai institute of technology, Chennai.
17. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Industrial Automation using CNC and Intelligent Systems” from 16th to 20th August 2021 organised by Manipal Institute of Technology, Manipal.
18. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Stress-busting meditation sittings” from 20th to 24th September 2021 organised by Manipal Institute of Technology, Manipal.
Workshop’s:
1. Three days workshop attended on “Outcome Based Education” organized by Dept of CSE, RYMEC Ballari from 22nd to 24th November 2016.
2. Two days workshop attended on “Research Methodology” organized by Dept of EEE at RYMEC, Ballari from 22nd to 23rd Feb 2018.
3. One day Workshop attended on “Tableau: An Advanced Analytics Tool for Data Analysis” at Dept of ME BITM, Ballari on 10th March 2018.
4. Two days Workshop organized on “Industrial Safety measures & Regulations” at RYMEC, Ballari on 21st & 22nd May 2018.
5. Six days Workshop attended on “Research Methodology & Latex” organized by VTU e-Learning, Mysuru from 8th to 13th July 2019 at RYMEC, Ballari.
6. One-day Workshop attended on “ Research Scopes in Mechanical Engineering” organized by Dept of Mechanical Engineering, Chennai Institute of Technology, Chennai on 7th May 2020.
7. One Week Workshop attended on " Composite Material and its Characterization" organized by Acharya institute of technology, Bangalore from 22th to 26th June 2020.
8. One Week Workshop attended on "Material Characterization using DMA" organized by Acharya institute of technology, Bangalore from 6th to 10th July 2020.
9. One Week Workshop attended on "Tribology and its Applications" organized by Acharya institute of technology, Bangalore in association with Ducom Instruments, Peenya, Bengaluru from 18th to 22nd January 2021.
Training Program’s
1. Successful completed One Week STTP through ICT Mode on “Outcome Based Education & Accreditation” from 24th to 28th October 2018 organised by NITTTR, Kolkata – Established by MHRD, Govt of India.
2. Successful completed One Week STTP through ICT Mode on “NBA Accreditation” from 17th to 21st June 2019 organised by NITTTR, Kolkata – Established by MHRD, Govt of India.
3. Successful completed One Week STTP through ICT Mode on “Rural Development through Technical Institute” from 29th July to 02nd August 2019 organised by NITTTR, Kolkata – Established by MHRD, Govt of India.
4. Successful completed One Week STTP on "Renewable Energy and Utilization" from 26th to 30th May 2020 organised by Sandip Institute of Engineering and Management, Nashik.
5. Successful completed One Week STTPP on "Innovative Approaches in Teaching Pedagogy" from 31st May to 05th June 2021 organised by NITTE Meenakshi Institute of Technology, Bangalore.
6. Successful completed Five Days STTPP on "Technology Enablers for Smart Manufacturing Using Industry 4.0" from 12th to 16th July 2021 organised by NITTE Meenakshi Institute of Technology, Bangalore.
1. “Wear Study on Hybrid Natural Fiber Polymer Composite Materials Used as Orthopaedic Implants” in International Journal of Recent Development in Engineering and Technology (IJRDET), ISSN 2347-6435(Online) Volume 3, Issue 1, July 2014.
2. “Characterization and Investigation of Mechanical Properties of Hybrid Natural Fiber Polymer Composite Materials Used as Orthopaedic Implants for Femur Bone Prosthesis” in IOSR Journal of Mechanical and Civil Engineering e-ISSN: 2278-1684,p-ISSN: 2320-334X, Vol-1, Issue 4 Ver. II, PP 40-52, Jul- Aug.-2014.
3. “Ergonomic Analysis of Welding Operator Postures” in International Journal of Mechanical and Production Engineering, ISSN: 2320-2092 Volume- 4, Issue-6, June-2016.
4. “Fabrication of Erosion Corrosion Equipment and Testing of Al 6063 Alloy” in International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 5 Issue 11, November-2016.
5. “Effect of Chemical Composition on Impact Strength of Steel” in International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653 Vol 5, Pg No 1556-1567, May 2017.
6. “Hot Metal De-Sulphurisation by KR Process” in International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653 Volume 5, Page No 1827-1843, May 2017.
7. "Design and Fabrication of Plantain (Banana) Fiber Extracting Mechanism" in International Journal of Science and Research (IJSR) ISSN: 2319-7064 Index Copernicus Value (2016): 79.57 | Impact Factor (2017): 7.296, Paper ID: ART20191808 DOI: 10.21275/ART20191808 Vol 7 Issue 10, Page No 520-523, Oct2018.
8. “Evaluation of Post Curing Effect on Mechanical Characterization of Polymer Matrix Composites” in Journal of Emerging Technologies and Innovative Research (JETIR) www.jetir.org (ISSN-2349-5162) © 2019 JETIR, Volume 6, Issue 4, April 2019.
9. “Natural Fibers Reinforced Polymer Composite Materials – A Review” in International Journal of Scientific Research and Review UGC Journal No.: 64650, ISSN No.: 2279-543X, Volume 07, Issue 05, May 2019.
10. “Process Optimization and Influence of Micro Structural Characterization by Friction Stir Welding of Various Materials” in International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-2, December 2019. Scopus Indexed Journal.
11. “Investigations of Tensile Properties of Modified Epoxy-Based Composites Reinforced with Kenaf/Hemp Fibers for Orthopaedic Implants” in IOP Conf Series: Materials Science and Engineering, Scopus Indexed Journal, ISSN: 1757-899X, DOI:10.1088/1757-899X/988/1/012127, 988(1), 2020.
12. “Experimental Investigation on Compression and Bending Properties of Epoxy Composites Reinforced with Al2O3, Kenaf/Hemp Fibers for Orthopaedic Implants” in IOP Conf Series: Materials Science and Engineering, Scopus Indexed Journal, ISSN: 1757-899X, DOI:10.1088/1757-899X/988/1/012001, 988(1), 2020.
1. A Text Book on Non-Traditional Machining is published under INSC International Publishers, ISBN: 978-1-68576-135-6.
1. Life Member of ISTE- LM111302 – 2016.
2. Life Member of IFERP- PMIN25489760 – 2019.
3. Member of International Association of Engineers (IAENG) – 245239.
4. Fellow Member of IRED (UAMAE) - SM101000601814 – 2019 to 2022.
5. Associate Member of IRED (UAMAE) - AM101000584336– 2019 to 2022.
6. Senior Member of ISME (SMISME) - No.SMISME200424RYM - 2020
Reviewer
1. Institute for Exploring Advances in Engineering (IEAE).
2. International Journal of Creative Research Thoughts (IJCRT).
3. International Journal of Engineering Research and Technology (IJERT).
4. Institute of Scholars (InSc).
Editorial Board Member
1. Journal of Automotive Mechanical & Aerospace Engineering Research ISSN: 2229-9270.
Cantonment, Ballari 583104, Karnataka | |
08392-244809 | |
08392-242148 | |
This email address is being protected from spambots. You need JavaScript enabled to view it. |