My Self Prof. Vaddin Chetan, working as Assistant Professor, in the Department of Mechanical Engineering, completed my bachelor’s degree in Mechanical Engineering from Visvesvaraya Technological University, Belagavi and Immediately joined M.Tech (Computational Analysis in Mechanical Sciences) at Vidya Vardhaka College of Engineering, Mysuru and Carried out my master’s research work on Gas Turbine Diffuser at Computational Mechanics Laboratory, Department of Aerospace Engineering, Indian Institute of Science (IISc), Bengaluru with Dr. Prakash S Kulkarni Sir and Grabbed University Gold Medal for the Academic Excellence.
While continuing my research work, I am very interested towards Energy-efficient buildings and currently, I am pursuing my doctoral degree in the area of Heat Transfer with the Guidance of Dr. Kori Nagaraj Sir and Dr. Prakash S Kulkarni Sir.
1. Presented a paper titled “3D FLOW ANALYSIS OF GAS TURBINE EXHAUST DIFFUSER BY USING HEXAHEDRAL DOMINANT GRID” in International Conference on Technology Management for Green Environment (ICTMGE - 2013), Organized by Visvesvaraya Technological University, Regional Centre, Mysore, during 19th to 21st September 2013.
2. Presented a paper titled “REVIEW OF PASSIVE COOLING METHODS FOR BUILDINGS” in International Conference on Thermo Fluids and Energy Systems 2019 (ICTES - 2019), organized by Department of Mechanical Engineering, BNM Institute of Technology & Management, Bangalore on 27th and 28th December 2019.
1. Certified a course titled “LINUX POWER USER” by NIIT, New Delhi at Bellary center on 05th October 2007.
2. Certified a course titled “PROGRAMMING USING C++” by NIIT, New Delhi at Bellary center on 02nd November 2007.
3. Actively involved in the 5 days State level Workshop on “DIGITAL DESIGN FOR FPGAs USING VDHL” Organized by Department of Electronics & Communication Engineering, RYM Engineering College, Ballari, in Collaboration with Sandeepani School of VLSI Design & Advanced System Design & CG-CoreEL/Program and Solution, Bangalore and Sponsored by VTU, Belagavi, during 05th to 09th April 2010.
4. Attended 02 days National level Technical workshop on “COMPUTATIONAL FLUID TECHNIQUES IN INDUSTRIAL APPLICATIONS” Organized by Department of Mechanical Engineering, Adhiyamaan College of Engineering, Hosur, in association with ACRI Infotech Pvt. Ltd., Bangalore, during 24th & 25th September 2012.
5. Attended 05 days Short Term Training Programme on “HYDRAULICS & PNEUMATICS” Organized by VTU - Bosch Rexroth Centre of Competence in Automation Technology, VTU Regional Office, Mysore, during 11th to 15th October 2012.
6. Attended one day workshop on “COMPUTATIONAL SCIENCE” Organized by Supercomputer Education and Research Centre (SERC), Indian Institute of Science (IISc), Bangalore, on 25th February 2013.
7. Participated in One day Hands-on Seminar / Workshop on “SOLID WORKS” Organized jointly by Visvesvaraya Technological University, Belgaum and CoreCad Technologies Pvt. Ltd., Bangalore at Visvesvaraya Technological University Regional Center, Bangalore on 20th November 2014.
8. Participated in the Karnataka Science and Technology Academy Conference on “SCIENCE AND SOCIETY” Organized jointly by Department of Science and Technology, Government of Karnataka, Bangalore & Veerashaiva College, Ballari, during 16th & 17th January 2015.
9. Attended 3 days Faculty Development Programme on “INDUSTRIAL AUTOMATION AND COMPUTER AIDED ENGINEERING” Organized by Department of Mechanical & Industrial and Production Engineering, RYM Engineering College, Ballari, during 23rd July 2015 to 25th July 2015.
10. Attended 2 days Faculty Development Programme on “SYSTEM DYNAMICS” Organized by Department of Mechanical & Industrial and Production Engineering, RYM Engineering College, Ballari, during 18th to 19th February 2016.
11. Attended 4 days Faculty Development Programme on “OUTCOME BASED EDUCATION” Organized by Department of Mechanical & Industrial and Production Engineering, RYM Engineering College, Ballari, during 16th to 19th January 2017.
12. Attended 6 days Faculty Development Programme on “PRODUCT LIFE CYCLE AND THERMO ACOUSTIC REFRIGERATION” Organized by Department of Mechanical & Industrial and Production Engineering, RYM Engineering College, Ballari, during 11th to 16th August 2017.
13. Participated in 2 days Workshop on “RESEARCH METHODOLOGY” Organized jointly by Research Cell & Department of Electrical & Electronics Engineering, RYM Engineering College, Ballari, during 22nd February & 23rd February 2018.
14. Actively Involved in the Organization of 2 – days Student’s workshop on “INDUSTRIAL SAFETY MEASURES AND REGULATIONS” Organized by Department of Mechanical Engineering and Industrial & Production Engineering, RYM Engineering College, Ballari, during 21st May 2018 & 22nd May 2018.
15. Successfully completed AICTE Approved 2 Weeks Faculty Development Programme on “FOUNDATION PROGRAM IN ICT FOR EDUCATION (FDP101x)” Organized by Indian Institute of Technology (IITB), Bombay, Under PMMMNMTT, MHRD, GOI) from 08th March 2018 to 12th April 2018.
16. Successfully completed AICTE Approved 2 Weeks Faculty Development Programme on “PEDAGOGY FOR ONLINE AND BLENDED TEACHING-LEARNING PROCESS (FDP201x)” Organized by Indian Institute of Technology (IITB), Bombay, Under PMMMNMTT, MHRD, GOI, from 03rd May 2018 to 18th June 2018.
17. Honour Code Certificate Issued for “SKANI101x: Basic 3D Animation using Blender”, a Certification course offered by Indian Institute of Technology (IITB), Bombay. This is the Online certification course conducted from 04th April 2018 to 11th July 2018.
18. Attended Two Day Faculty Development Program on "VTU THESIS AND RESEARCH PAPER WRITING USING LaTeX" Organized by Department of Information Science & Engineering, SDM Institute of Technology, Ujire, in Collaboration with VTU E-Learning Centre, Mysuru on 24th and 25th September 2018.
19. Successfully completed Short Term Training Programme through ICT Mode on "OUTCOME BASED EDUCATION AND ACCREDITATION" organized by National Institute of Technical Teachers Training and Research, Kolkata from 24/09/2018 to 28/09/2018 (01 Week).
20. Successfully completed Short Term Training Programme through ICT Mode on "NBA ACCREDITATION" organized by National Institute of Technical Teachers Training and Research, Kolkata from 17/06/2019 to 21/06/2019 (01 Week).
21. Successfully completed Short Term Training Programme through ICT Mode on "RURAL DEVELOPMENT THROUGH TECHNICAL INSTITUTION" organized by National Institute of Technical Teachers Training and Research, Kolkata from 29/07/2019 to 02/08/2019 (01 Week).
22. Successfully organized ICT Mode one day workshop on "ARDUINO" as a Remote Centre Coordinator for RC1420, organized by Teaching Learning Centre, ICT, IIT Bombay, Funded by Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching (PMMMNMTT), MHRD, Govt. of India on 08/02/2020.
23. Participated & Completed one-day Coordinators workshop on "C and C++" as a Coordinator for RC1420, organized by Teaching Learning Centre, ICT, IIT Bombay, Funded by Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching (PMMMNMTT), MHRD, Govt. of India on 15/02/2020.
24. Participated & Completed AICTE Training and Learning (ATAL) Academy Online FDP on "Internet of Things (IoT)" from 20th April 2020 to 24th April 2020 at the National Institute of Technical Teachers Training and Research, Chandigarh.
25. Participated & Completed one-week online Faculty Development Program on "Moodle Learning Management System (Help to minimize the Impact of COVID-19 outbreak on educators" organized by Sinhgad Institute of Technology, Lonavala, Pune, Maharastra in association with "Spoken Tutorial Project - Indian Institute of Technology, Bombay" from 01st May 2020 to 06th May 2020.
26. Participated & Completed a two-week online Faculty Development Program on "LaTeX" organized by Gopalan College of Engineering & Management, Bangalore, in association with "Spoken Tutorial Project - Indian Institute of Technology, Bombay".
27. Participated & Completed an “Online Quiz on COVID-19 Awareness” organized by the Department of Information Science and Engineering of Sri Krishna Institute of Technology, Bengaluru on 5th May 2020.
28. Participated & Completed Online National Level FDP on "Decoding Examination During and Post COVID 19" on 08th May 2020, organized by SKILLSLATE and Powered by Zovy Studios, Pune.
29. Attended online Faculty Development Programme on "Contemporary Tools and Techniques for Teachers and Researchers in Higher Education: Experience of using Virtual Classrooms" held on 09th May 2020 at Cambridge Institute of Technology, Bengaluru.
30. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Cyber Security” from 18/05/2020 to 22/05/2020 at Dr Harisingh Gour University, Sagar (MP), bearing certificate No. ATAL/2020/1001683.
31. Successfully participated & completed One Week Faculty Development Programme (FDP) on “Research Trends in Thermal Engineering (RTTE) - 2020” organized by Department of Mechanical Engineering, Ballari Institute of Technology & Management, Ballari, from 09/06/2020 to 13/06/2020.
32. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “3D Printing & Design” from 15/06/2020 to 19/06/2020 at National Institute of Technology, Warangal, bearing certificate No. ATAL/2020/1002539.
33. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Blended Learning and Flipped Classroom” from 07/09/2020 to 11/09/2020 at National Institute of Technical Teachers Training and Research, Chandigarh, bearing certificate No. ATAL/2020/1596543192.
34. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Digital Marketing” from 10/10/2020 to 14/10/2020 at Gayatri Vidya Parishad College for Degree & PG Courses(A), bearing certificate No. ATAL/2020/1599026091.
35. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Advancements in Computational Fluid Dynamics using FLUIDYN” from 07/06/2021 to 11/06/2021 at Alliance University, Bangalore, bearing certificate No. ATAL/2021/1620350157.
36. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Computational Fluid Dynamics – A Potential Engineering Design Tool” from 26/07/2021 to 30/07/2021 at Centurion University of Technology and Management, bearing certificate No. ATAL/2021/1623561627.
37. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Industrial Automation using CNC and Intelligent Systems” from 16/08/2021 to 20/08/2021 at Manipal Institute of Technology, Manipal, bearing certificate No. ATAL/2021/1626779405.
38. Successfully participated & completed AICTE Training And Learning (ATAL) Academy Online FDP on “Outcome Based Education (OBE) and NBA Accreditation Process” from 20/09/2021 to 24/09/2021 at Manipal Institute of Technology, Manipal, bearing certificate No. ATAL/2021/1629741686.
1. Published a paper titled “REVIEW OF PASSIVE COOLING METHODS FOR BUILDINGS” in International Journal of Physics : Conference Series (IOP), 1473 (2020), 012054.
2. Published a paper titled “INVESTIGATION OF DISTINCT DIVERGENT ANGLED DIFFUSERS USING HEXAHEDRAL DOMINANT GRID” in International Journal of Mechanical Engineering & Technology (IJMET), Volume 9, Issue 4, April 2018, pp. 886-894. ISSN Print: 0976-6340 and ISSN Online: 0976-6359. Journal Impact Factor: 9.2286.
3. Published a paper titled “INVESTIGATION ON THE EFFECT OF MOISTURE CONTENT AND TEMPERATURE ON SPECIFIC HEAT OF CUCUMIS MELO (MUSKMELON)” in International Journal of Mechanical Engineering & Technology (IJMET), Volume 8, Issue 4, April 2017, pp. 448-455. ISSN Print: 0976-6340 and ISSN Online: 0976-6359. Journal Impact Factor: 9.2286.
4. Published a paper titled “EXPERIMENTAL INVESTIGATION ON THERMAL CONDUCTIVITY OF MUSKMELON (CUCUMIS MELO) AS A FUNCTION OF MOISTURE CONTENT AND DENSITY BY TRANSIENT ANALYSIS” in International Journal of Engineering Development & Research (IJERD), Volume 4, Issue 3, September 2016, pp. 958-965. ISSN: 2321-9939.
5. Published a paper titled “3D FLOW ANALYSIS OF GAS TURBINE EXHAUST DIFFUSER BY USING HEXAHEDRAL DOMINANT GRID” in Midas Touch International Journal of Commerce, Management and Technology, Volume 2, Issue 1, January 2014, pp. 382-397. ISSN: 2320-7787 (Proceedings of International Conference on Technology Management for Green Environment (ICTMGE- 2013)).
6. Presented a paper titled “3D FLOW ANALYSIS OF GAS TURBINE EXHAUST DIFFUSER BY USING HEXAHEDRAL DOMINANT GRID” in International Conference on Technology Management for Green Environment (ICTMGE - 2013), Organized by Visvesvaraya Technological University, Regional Centre, Mysore, during 19th to 21st September 2013.
7. Presented a paper titled "Numerical Investigations of PGT10 Gas Turbine Exhaust Diffuser" in 15th AeSI Annual CFD Symposium Organized by CFD Division, Aeronautical Society of India, Bangalore, at Department of Aerospace Engineering, Indian Institute of Science, Bangalore on August 9 - 10th 2013.
8. Published a paper titled “NUMERICAL INVESTIGATIONS OF PGT10 GAS TURBINE EXHAUST DIFFUSER USING HEXAHEDRAL DOMINANT GRID” in International Journal of Engineering & Innovative Technology (IJEIT), Volume 3, Issue 1, July 2013, pp. 392-400. ISSN: 2277-3754.
9. Presented a Paper titled “Kitchen Waste Based Compact Biogas Plant” in a National Level Mechanical Engineering Student’s Technical Symposium (DYNAMECHS 10) in the event TECHNION Organized by Dept. of Mechanical Engineering, JNTUA College of Engineering, Anantapur (A.P.) and Bagged Second Prize in the Event.
10. Presented a Poster titled “Evolution of Differential Gear Mechanism” in a National Level Mechanical Engineering Student’s Technical Symposium (DYNAMECHS 10) in the event POSTER PRESENTATION Organized by Dept. of Mechanical Engineering, JNTUA College of Engineering, Anantapur (A.P.).
1. As a Resource Person for Delivering a Seminar on "ACCESSING LIBRARY E-RESOURCES" Jointly organized by Department of Library & Department of Civil Engineering, RYM Engineering College, Ballari.
1. Life Member for "INDIAN SOCIETY FOR TECHNICAL EDUCATION".
2. Associate Member for "INDIAN INSTITUTE OF ENGINEERS".
3. Member for "INTERNATIONAL ASSOCIATION OF ENGINEERS".
Editorial Board Member Journal of Automotive Mechanical & Aerospace Engineering Research ISSN: 2229-9270.
Cantonment, Ballari 583104, Karnataka | |
08392-244809 | |
08392-242148 | |
This email address is being protected from spambots. You need JavaScript enabled to view it. |