BIO-DATA
Name and address |
Dr Jagannatha Reddy Professor, Department of Mechanical Engineering RYMEC. Cantonment Bellary |
Fathers Name |
G Basavana Goud |
Date of Birth |
01-06-1964 |
Sex |
Male |
Passport Number |
A6702992 |
Religion |
Hindu |
Address for Correspondence |
Dr. G Jagannatha Reddy D.No.46/1 W.NO-7, Vasudeva Naidu Street Bellary |
Office Contact No |
08392-242148 |
Education Qualification;
Degree |
College |
University |
Year Of Passing |
Specialization |
Class Obtained |
Percentage % |
B.E |
Vijayanagar Engg College, Bellary |
Gulbarga University |
1988 |
Mechanical Engg. |
First Class |
67.42 |
M.E |
Basaveshwara Engg College, Bagalkot |
Karnataka University |
1993 |
Production Management |
First Class |
62.17 |
Ph.D. |
Basaveshwara Engg College, Bagalkot |
VTU |
2014 |
Material science engineering |
Awarded |
- |
Employment Details:
Sl No |
Designation |
From |
To |
Employer |
1 |
Lecturer |
15.2.1992 |
31.7.2005 |
Principal VNEC Bellary |
2 |
Asst Prof |
1.8.2005 |
27.8.2005 |
Principal VNEC Bellary |
3 |
Asst Prof |
28.8.2005 |
14.2.2006 |
Principal PDIT Hospet |
4 |
Asst Prof |
15.2.2006 |
30-11-2012 |
Principal RYMEC(VNEC) Bellary |
5 |
Associate prof |
1-12-2012 |
1-6-2015 |
Principal RYMEC(VNEC) Bellary |
6 |
Professor |
1-6-2015 |
Till date |
Principal RYMEC(VNEC) Bellary |
Additional responsibilities are taken:-
Director of VNEC Co-operative society Bellary, Treasurer alumni association, Maintaining the departmental library
Guest Lecturer In Other Institutes: Govt.Polytechnic, Bellary
Production technology
V.V. sangha’s polytechnic college. Bellary.
01. ISTE State Convention- Karnataka Chapter held at KREC Suratkal-XXIII Annual Convention. Dec- 26-28, 1993. “Continuing Education for engineering Manpower”
02. L.S.Chandrakanth memorial Seminar on Alternate sources of energy and conservation- - ISTE chapter VNEC Bellary 11.06.94
03. Third state-level ISTE Convention and National seminar on “Prospects and Trends in Technical education” VNEC Bellary Dec 23, 24.2000
04. IV ISTE State Convention- Karnataka Chapter held at BEC. Bagalkot 3-4 Nov 2001.”Technical education and Challenges in the new millennium”
05. 26th Series, SPP Seminar cum exhibition at VEC, Bellary on 12-13, 2003. Organized by KSCST.
06. National Seminar on “Future trends in technical education in INDIA”, ISTE Convention held at VEC, Bellary in 2003.
07. Faculty development programme on “Entrepreneurship Development” CEDOK, Dharwad at District Industries Centre Bellary, 30thJune -11th July 2005.
08. Participated in the training programme on “ INSTRUCTIONAL DESIGN AND DELIVERY” conducted by National Institute training teachers training & Research, Chennai at V.E.C. Bellary from 16-21.Aug 2005.
09. Attended workshop on Computer Aided Engineering Drawing, on 03.07.2006 to 05.07.2006 at V.E.C. Bellary by V.T.U. Belgaum.
10. Attended short term training programme on “NANO TECHNOLOGY AND ITS APPLICATIONS” under TEQIP B.E.C., Bagalkot during 14-19 August 2006.
11. Attended National Conference on World Class manufacturing practices organized by Department of IPE B.E.C. Bagalkot during 02-03 April 2007.
12. Attended one Week short term training programme on material development, manufacturing and characterization organized by Dept. of Mechanical Engg. B.E.C., Bagalkot under TEQIP during 16-21 April 2007.
13. Attended workshop on Computer Aided Machine Drawing, on 26-29 July 2007 at V.E.C. Bellary by V.T.U. Belgaum
14. Attended one day workshop on significance of 3D modelling and Design Validation organized by VTU Belgaum at R.Y.M.E.C. Bellary on 15 October 2008
15. Participated in two days workshop on Research, methodologies and Report writing organized by small e-learning centre, Mysore on 25.05.2009 to 26.05.2009 at K.L.S. Gogte Institute of technology Belgaum.
16. Attended 40th ISTE National annual Convention held at Mepco Schienk Engineering College Sivakasi during Dec 02-04, 2010
17. Attended ASIA-PACIFIC WORKSHOP ON MATERIALS CHRACTERIZATION organized by Crystal Growth Centre, Anna University, Chennai during 22-24 September 2011.
18. Participated In Three Days Faculty Development Programme On “Industrial Automation and Computer Aided Engineering Conducted By Dept of Mech And I&PE RYMEC, BALLARI during 23rd and 25th July 2015
19. Participated in two days faculty development programme on system Dynamics Conducted by Dept of Mech And I&PE RYMEC, BALLARI during 18th and 19th February 2016
20. Participated in the event of Outcome based education and criteria wise Analysis conducted by RYMEC BALLARI during 8-9 July 2016 .
21. Participated in 4 days in-house faculty development programme on “Outcome Based Education ” conducted by Dept of Mech and I&PE RYMEC Ballari from 16-19 jan 2017
22 Participated. in an AICTE approved FDP on “Foundation Program in ICT for Education” Conducted by IIT Bombay from 8 Mar to 12 Apr 2018
1. Jagannatha Reddy, G.B.Rudrakshi, ‘Spray deposition processing and characterization of Aluminium alloys’, NCRS-2007 BEC Bagalkot. ( 12, 13 March 2007) 51
2. G.Jagannatha Reddy, G.B.Rudrakshi’, ‘Spray deposition processing & wear characteristics of Al alloys’, Emerging trends in Mechatronics and instrumentation, Sri Venkateswara University, Tirupati, (29, 30 June 2007) 53
3.G.Jagannatha Reddy, D.M.Goudar, G.B.Rudrakshi, ‘Process, microstructure and tensile properties of aluminium alloys’, COMET 2010 BITM Bellary (19, 20 Feb 2010).
Papers published
Vithal Rao Chavan, K R Dinesh, K Veeresh, G.Jagannatha Reddy, Veerabhadrappa Algur, Venkatesh “Fabrication and Evaluation of Mechanical Properties of Fe2O3 Particulate Filled Hybrid Composites” Vol. 16 | MARCH 2015
Vijay Kumar B H, G Jagannath Reddy Piyush Srivastav “Experimental Investigation of Welder Modification at PLTCM” IJSRD - International Journal for Scientific Research & Development| Vol. 3, Issue 12, 2016
C Thotappa, G Jagannatha Reddy, Santhosh Kumar K “Design & Analysis of Orifice Bypass Arrangement System” International Journal of Scientific & Engineering Research Volume 8, Issue 6, June-2017 ISSN 2229-5518
Viswanath D, Pranesh Budhihal Kori Nagaraj, G Jagannatha Reddy “Case Study of Bucket Liner of De-Dusting Car in Coke Dry Quenching in the Department of Coke Ovens” Journal of Mechanical and Automation Engineering Volume 8, Issue 2, 107 Published with IEEE-OJEMB.
MISTE
Cantonment, Ballari 583104, Karnataka | |
08392-244809 | |
08392-242148 | |
This email address is being protected from spambots. You need JavaScript enabled to view it. |